Transmission Line Conductors for Overhead Power Distribution and Transmission
Overhead lines carry power over long distances, so the conductor must be strong, light and resistant to weather. Stuffind supplies ACSR, AAC and AAAC overhead conductors for distribution and transmission projects, with fast delivery across Pakistan and help choosing the right conductor for your line.
[Request a Quote] [Contact Our Team]
What Are Transmission Line Conductors?
Transmission line conductors are bare (uninsulated) metal wires strung between towers and poles to carry electricity. Because air insulates the line, the conductor needs no plastic covering. Instead, it relies on spacing, insulators and the supporting structure for safety.
Most overhead conductors use aluminium, because it is light, conductive and economical. However, aluminium alone is not very strong. Therefore, many conductors combine aluminium with a steel core, which carries the mechanical load, while the aluminium carries the current. As a result, utilities can span long distances with fewer towers.
Overhead Conductors vs Insulated Cables
| Overhead Conductor | Insulated Power Cable | |
|---|---|---|
| Insulation | None (bare) | PVC or XLPE |
| Installation | Poles and towers | Underground, trays, ducts |
| Cost per km | Lower | Higher |
| Maintenance | Visible, easy to inspect | Harder to access |
| Typical use | Long-distance and rural lines | Cities, buildings, short routes |
For underground and building use, see our LT / HT Power Cables.
Types of Transmission Line Conductors
Several conductor types are available, so you can match the conductor to your span, load and environment.
ACSR (Aluminium Conductor Steel Reinforced)
ACSR has stranded aluminium wires around a galvanised steel core. The steel gives high tensile strength, so ACSR suits long spans, heavy loads and ice or wind conditions. It is the most widely used overhead conductor worldwide.
AAC (All Aluminium Conductor)
AAC uses only aluminium strands. It offers excellent conductivity and good corrosion resistance, so it suits short spans and urban distribution lines where strength is less critical.
AAAC (All Aluminium Alloy Conductor)
AAAC uses a strong aluminium alloy. As a result, it combines good strength with lower weight and better corrosion resistance than ACSR, which makes it a strong choice for coastal and polluted areas.
ACAR (Aluminium Conductor Alloy Reinforced)
ACAR places aluminium alloy strands in the core, which balances strength and conductivity.
AACSR (Aluminium Alloy Conductor Steel Reinforced)
AACSR combines alloy aluminium with a steel core for very high strength on demanding spans.
Bare Copper Conductor
Copper offers the highest conductivity, but it costs more and weighs more. Therefore, it is mainly used for earthing grids, substations and special applications.
Galvanised Steel Earth Wire
Earth wire (shield wire) runs above the phase conductors to protect the line from lightning.
Common ACSR Conductor Names and Sizes
Utilities often refer to conductors by animal names. The table below shows typical examples, and values are approximate.
| Conductor Name | Approx. Aluminium Area | Typical Use |
|---|---|---|
| Rabbit | ~50 mm² | 11 kV distribution, rural lines |
| Dog | ~100 mm² | 11 kV and 33 kV distribution |
| Wolf | ~150 mm² | 33 kV lines |
| Panther | ~200 mm² | 33 kV and 66 kV lines |
| Zebra | ~400 mm² | 132 kV and heavy transmission |
| Drake | ~400 mm² | 132 kV and 220 kV transmission |
These are typical figures only. Stranding, steel content, diameter and current rating vary by standard and manufacturer, so confirm the details for each product you supply.
Typical Specifications
(Confirm these values against your actual product range before publishing.)
| Specification | Typical Details |
|---|---|
| Conductor types | ACSR, AAC, AAAC, ACAR (confirm per product) |
| Aluminium wire | Hard-drawn aluminium (EC grade) or aluminium alloy |
| Core | Galvanised steel (for ACSR) |
| Size range | About 20 mm² to 600 mm² aluminium area (confirm per product) |
| Voltage use | Typically 11 kV up to 220 kV lines (depends on design) |
| Standards | IEC 61089, BS 215, ASTM B232 (ACSR), ASTM B231 (AAC), or equivalent (confirm per product) |
| Grease option | Greased core or full grease for corrosion protection (confirm per product) |
| Supply form | Steel or wooden drums |
Key Features & Benefits
Overhead conductors deliver power efficiently over long distances. First, aluminium’s low weight means longer spans and fewer poles, so line costs drop. Second, the steel core in ACSR adds strength, which keeps sag under control.
In addition, hard-drawn aluminium resists corrosion in most climates, while alloy conductors resist it even better in coastal or industrial air. Moreover, bare conductors are easy to inspect and repair, so maintenance is simpler than with buried cable.
Finally, standard sizes and names make ordering simple, because engineers across the industry recognise the same designations.
Applications
Transmission line conductors serve many power projects. For example:
- Distribution networks: 11 kV and 33 kV feeders in towns and villages
- Sub-transmission lines: 66 kV and 132 kV links between grid stations
- Transmission lines: high-voltage backbone routes between regions
- Rural electrification: long, light-load lines to remote areas
- Industrial plants: overhead feeders from grid to factory substations
- Solar and wind projects: evacuation lines to the grid
- Substations: busbars, jumpers and earthing
- Railways and infrastructure: overhead supply lines
How to Choose the Right Conductor
First, determine the voltage level and the current load. Then choose a conductor size that carries the current without overheating, because heat increases sag and losses. In addition, consider future growth, since upgrading an installed line later is expensive.
Next, check the span length and mechanical loads. Long spans, strong winds or ice need high-strength conductors such as ACSR or AACSR. In contrast, short urban spans can use AAC or AAAC.
Then consider the environment. Coastal, industrial and polluted areas attack steel and aluminium, so AAAC or greased ACSR lasts longer. Likewise, hot climates reduce current capacity, so allow a margin.
After that, compare voltage drop and power losses over the line length, because long lines need larger conductors. Finally, confirm the standard that your utility or project requires, and ask for test certificates.
Not sure which conductor you need? Send us your voltage, load, span length and location, and we will recommend suitable options.
Handling & Installation Tips
Overhead conductors need careful handling. First, store drums upright on firm, dry ground and protect them from moisture and damage. Second, avoid dragging the conductor on the ground or over sharp edges, because scratches create weak points and corona discharge.
Also, use proper stringing equipment, such as rollers, tensioners and pullers, so the conductor stays smooth. Set the sag and tension according to the design and the temperature, since errors cause clearance problems or overload.
In addition, use compatible clamps, joints and fittings. Mixing aluminium with copper fittings without proper bimetallic parts causes corrosion. Finally, only qualified linemen and engineers should install and energise overhead lines, following local safety regulations.
Why Buy Transmission Line Conductors from Stuffind
Stuffind is an engineering and procurement partner that supplies reliable equipment to customers across industries. Because we source from trusted manufacturers, you get consistent quality and dependable supply for large projects.
We deliver across Pakistan (adjust to where you deliver), and our team helps with conductor selection and quantities. In addition, we offer competitive quotes for single drums, bulk quantities and complete project orders.
You can also source LT / HT power cables, switchgear and DBs and valves from the same supplier, so your project purchasing stays simple.
Frequently Asked Questions
What is ACSR conductor?
ACSR stands for Aluminium Conductor Steel Reinforced. It has stranded aluminium wires around a galvanised steel core, so it combines good conductivity with high strength for long overhead spans.
What is the difference between ACSR, AAC and AAAC?
ACSR has a steel core and suits long spans and heavy loads. AAC is all aluminium and suits short spans. AAAC uses aluminium alloy, so it offers good strength, light weight and better corrosion resistance.
What do conductor names like Rabbit, Dog and Panther mean?
They are traditional code names for standard ACSR sizes. Each name corresponds to a defined stranding and aluminium area, for example Rabbit is about 50 mm² and Dog is about 100 mm². Therefore, engineers can specify a conductor by name instead of listing every detail.
Which conductor is best for coastal areas?
AAAC or greased ACSR usually lasts longer, because alloy aluminium resists corrosion, and grease protects the steel core from salt air.
Why does overhead conductor have no insulation?
Air acts as the insulator, and the conductor is kept at a safe distance by towers, poles and insulators. As a result, the line is lighter and cheaper than insulated cable.
What size conductor do I need?
It depends on the voltage, current, span length, voltage drop and climate. Share these details, and we will help you choose. However, a qualified engineer should confirm the final design.
Can I use overhead conductor underground?
No. Bare conductors are not designed for burial or contact with soil. For underground routes, use insulated and armoured power cable instead.
What standards do your conductors meet?
Overhead conductors typically follow IEC 61089, BS 215 or ASTM standards. Tell us your project requirements, and we will confirm suitable products and test certificates.
How are conductors supplied?
They are supplied on steel or wooden drums in standard lengths. Contact us with the length you need.
Do you supply in bulk?
Yes. We supply single drums, bulk quantities and complete project orders.
Related Products
LT / HT Power Cables · Switchboard Cables · Solar & Specialized Engineering Lines · Flexible & Control Cables · Telecom & Networking Cable · Generators · All Cables
Get a Quote on Transmission Line Conductors
Tell us the conductor type (ACSR, AAC or AAAC), name or size, length and quantity, plus your voltage level. Our team will respond quickly with the right recommendation and a competitive quote.
[Request a Quote]
Email: stuffind@stuffind.com
Availability: Mon–Sat, 09:00–22:00