Menu

Flexible & Control Cables for Machines, Panels and Automation

Flexible and control cables connect motors, sensors, switches and control panels, so they must bend, last and carry signals reliably. Stuffind supplies flexible and control cables in many core counts and sizes, with fast delivery across Pakistan and help choosing the right cable for your equipment.

[Request a Quote] [Contact Our Team]


What Are Flexible and Control Cables?

Flexible cables have fine-strand copper conductors, so they bend easily and tolerate movement. Control cables, on the other hand, carry low-power signals between controllers, sensors, relays, switches and actuators. Many products combine both features, which means a single cable can be flexible and also carry multiple control circuits.

Both types are usually multi-core, with several insulated conductors under one outer sheath. Because every core is colour-coded or numbered, installers can identify circuits quickly and connect them correctly. As a result, wiring is faster, neater and easier to maintain.

Flexible vs Control Cable at a Glance

Flexible Cable Control Cable
Main purpose Power supply to moving or portable equipment Signals and control circuits
Conductor Fine-strand copper (Class 5) Stranded or fine-strand copper
Typical cores 2 to 5 cores 2 to 61 or more cores
Core identification Colours Colours or numbers
Screening Usually none Often available (braid or foil)
Typical use Machines, pumps, tools Panels, automation, instrumentation

Types of Flexible & Control Cables

Several constructions are available, so you can match the cable to your equipment and environment.

PVC Flexible Cable (Round, Multi-Core)

This is the general-purpose choice for appliances, machines and light industrial equipment. It has PVC insulation and a PVC sheath, so it suits dry and occasionally damp indoor locations. A common designation is H05VV-F.

Rubber Flexible Cable (H07RN-F Type)

Rubber-sheathed cable withstands heavy handling, abrasion, oil and outdoor weather. Therefore, it suits construction sites, portable tools, pumps and temporary power. In addition, it stays flexible in colder conditions.

Multi-Core Control Cable (Unscreened)

This cable carries control signals over several cores at once. It suits panel-to-machine wiring where electrical noise is low.

Screened (Shielded) Control Cable

A copper braid or foil screen surrounds the cores. Consequently, it protects signals from electrical noise caused by motors, drives and power cables, so it is the better choice for sensitive control and instrumentation circuits.

Numbered-Core Control Cable

Black cores carry printed numbers, with a green/yellow earth core in many versions. Numbered cores simplify wiring in large installations, because each circuit has its own identity.

Flat and Special Flexible Cables

Flat cables suit moving applications such as cranes and hoists. Meanwhile, special versions handle high temperature, oil resistance or continuous flexing.


Typical Specifications of Flexible & Control Cables

(Confirm these values against your actual product range before publishing.)

Specification Typical Details
Conductor Plain annealed copper, flexible (Class 5) or stranded
Insulation PVC or rubber
Outer sheath PVC, rubber (EPR/CPE) or PUR (confirm per product)
Number of cores 2 to 61 or more (confirm per product)
Size range 0.5 mm² to 16 mm² (confirm per product)
Voltage rating 300/300V, 300/500V or 450/750V (confirm per product)
Screening Unscreened, braided or foil (confirm per product)
Max. conductor temperature PVC: 70°C. Rubber: 60°C to 90°C (confirm)
Core identification Colour coded or numbered, with or without green/yellow earth
Standards IEC 60227, IEC 60245, IEC 60228 or equivalent (confirm per product)
Supply form Coils or drums

Key Features & Benefits of Flexible & Control Cables

Fine-strand copper is the key advantage here. It bends repeatedly without breaking, so the cable lasts longer on moving equipment. In addition, multi-core construction replaces several single wires with one neat cable, which saves installation time.

Outer sheaths protect the cores from abrasion, moisture, oil and chemicals. Moreover, colour-coded or numbered cores reduce wiring mistakes, because every circuit is easy to identify. Screened versions add noise protection, so control signals stay clean.

Finally, a wide range of core counts and sizes lets one supplier cover everything from a simple appliance to a complex automation panel.


Applications

Flexible and control cables serve many industries. For example:

  • Industrial machinery: motors, conveyors, presses and packaging lines
  • Control panels and automation: PLC, relay and sensor wiring
  • Pumps and compressors: power and control connections
  • Construction and portable equipment: rubber cables for tools and temporary supply
  • HVAC and building services: fans, dampers and control systems
  • Water and wastewater plants: pump stations and instrumentation
  • Fuel stations and workshops: equipment and dispenser control wiring
  • Cranes, hoists and lifts: moving and trailing connections
  • Generators and ATS panels: control and monitoring circuits

How to Choose the Right Cable

First, decide the purpose. If the cable supplies power to moving or portable equipment, choose a flexible power cable. If it carries signals between a controller and devices, choose a control cable instead.

Next, count the cores you need. Add the circuits, then allow one or two spare cores, so future changes stay simple. In addition, check the size of each core against the current it carries, because an undersized core overheats.

Then think about the environment. Rubber sheaths suit outdoor, oily or rough conditions, whereas PVC suits dry indoor use. Likewise, if the cable runs near motors, drives or power cables, choose a screened version to block interference.

After that, consider movement. Continuous flexing needs a fine-strand, purpose-built flexible cable, while fixed wiring can use standard construction. Finally, confirm the voltage rating and the standard that your project requires.

Not sure what you need? Send us your equipment, number of circuits and operating conditions, and we will recommend a suitable cable.


Installation & Safety Tips

Careful installation keeps flexible and control cables working for years. First, respect the minimum bending radius, because sharp bends damage conductors and insulation. Second, avoid pulling the cable with excessive force.

Also, separate control cables from heavy power cables where possible, or use screened cable, to reduce interference. When you use screened cable, ground the screen correctly, usually at one end, following your design.

In addition, use cable glands, strain relief and ferrules at connections, so strands stay secure. Do not exceed the voltage and temperature ratings, and protect cables from heat, oil and sharp edges. Finally, have qualified personnel install the cable and follow local regulations.


Why Buy Flexible & Control Cables from Stuffind

Stuffind is an engineering and procurement partner that supplies reliable equipment to customers across industries. Because we source from trusted manufacturers, you get consistent quality and dependable supply.

We offer many core counts, sizes and sheath types, and we deliver across Pakistan, including Karachi, Lahore and Islamabad (adjust to where you deliver). If you need help with selection, our team will guide you. Moreover, we provide competitive quotes for coils, full drums and project orders.

You can also source switchboard cables, LT / HT power cables, UPS systems and batteries from the same supplier.


Frequently Asked Questions about Flexible & Control Cables

What is the difference between flexible cable and control cable?

Flexible cable supplies power to moving or portable equipment and uses fine-strand copper. Control cable carries low-power signals between controllers and devices, and often has numbered cores or a screen. However, many products combine both features.

What is a screened control cable?

It is a control cable with a copper braid or foil layer around the cores. This screen blocks electrical noise, so signals stay accurate near motors and drives.

What does H05VV-F mean?

It is a European designation for a round, flexible, PVC insulated and PVC sheathed cable rated 300/500V. The “F” indicates a flexible conductor, which suits appliances and light machinery.

When should I use rubber flexible cable?

Use rubber cable where conditions are tough, such as construction sites, outdoor locations or areas with oil and abrasion. In contrast, PVC cable is better suited to dry indoor use.

Why do some control cables have numbered cores?

Numbered cores make each circuit easy to identify. As a result, wiring large panels is faster and mistakes are less likely.

How many spare cores should I plan for?

Many designers include one or two spare cores, or around 10 to 20 percent extra. Therefore, you can add circuits later without pulling a new cable.

Can I use control cable to power a motor?

Only if the cable’s core size and voltage rating suit the motor current. Otherwise, use a proper power or flexible cable. Share your motor details, and we will help you choose.

Can control cable be buried underground?

Not unless it is designed for it. Standard control cables lack armour, so use an armoured cable or run them in ducts. See our LT / HT Power Cables for armoured options.

Do you supply screened and numbered-core cable?

Yes, subject to availability. Tell us the core count, size and screening you need, and we will confirm suitable products.

Do you supply in bulk?

Yes. We supply single coils, full drums and complete project orders.


Related Products

Single Core PVC Cables · Multi-Core Flat Cable · Switchboard Cables · LT / HT Power Cables · Solar & Specialized Engineering Lines · Telecom & Networking Cable · All Cables


Get a Quote on Flexible & Control Cables

Tell us the cable type, number of cores, core size, screening, length and quantity. Our team will respond quickly with the right recommendation and a competitive quote.

[Request a Quote]
Email: stuffind@stuffind.com | Availability: Mon–Sat, 09:00–22:00